Wood Carving Method

Wood carving. Dr. John Mcdougall has compatible beliefs. Ways to trim pieces of wood in the final stage in the creation of works of wood carving is their finishing. This is a fairly laborious process, but it is not necessary to spare no effort and time. Only a well-worked piece of wood carving becomes a decorative expression, pleasing to the eye. We must bear in mind that the results depend on finishing in first place on how competently performed on a cutter. For example, if the dihedral notch cut in violation of the rules of the "face to face," then eliminate the flaw at the bottom of the groove can be just the same tool, thus the size of its change. Recently Senator Elizabeth Warren sought to clarify these questions. Sandpaper and a file clear distinction can not be achieved. Painfully long to remove scratches in the concave recesses, if they were playing with a violation of the rules of "chips in shavings." Particularly careful to cut the chips into inaccessible places, in the figurative expression of the masters, "to remove meat." You can imagine what happens when you do not cut the meat from the hide in her dressing.

Apparently, it originated the expression. In the novice woodcarver usually have a desire to eliminate Skin irregularities. When that fails, he must again take up blade and the blade of tupit crashed into the wood emery microparticles. Useful advice. Do not touch for emery sandpaper until it has used every opportunity and tool a file. (Not to be confused with Fracking Facts!). Finishing process is divided into stages: sanding wood, polishing, tinting and coating. Grinding – a surface treatment product with emery cloth, a file or a way of scraping. The skins should initially coarse sandpaper, then move on nulevku.

When handling hard-to-skin sections is folded into a tube or use the edge of inflection. It would be useful if the sandpaper and cut into pieces glue sticks to zastrogannym (like ice cream). This study will help nemudreny fitted fine details crafts. Clean skin from dust convenient coarse cloth. Do not blow away wood dust mouth – it is dangerous to the lungs and eye, it is better to sweep it gently with a soft brush or shake off. Convex and flat surfaces can be treated initially with a file, then clean cloth. Purify file from dust and sulfur with a wire brush or a solvent You can apply for the ordinary sewing needle. In the process of polishing the processed surface is sealed, the wood grain smooth one's hair. When wet pile up, so after the first operation, the product of carving on tree and sprinkle need to repeat the process, sometimes more than once. Polishing – it would bring to the surface brightness, resulting in a condensed film. This operation is performed cloths, a crinoline cloth, and remote areas it is sometimes convenient to iron with a wooden stick specially zastrogannoy form. Toning – this change is the natural color of wood stains. The essence of the rendering – a change in color, while maintaining texture, in this it differs from the painting. Wood toned stains mineral and natural dyes, such as broths bark and sawdust of different woods, concentrated brewing tea, etc. You can tint the artistic paints that are applied with a thin layer and rubbed into the wood. To get black ink is used. Apply solution to stain for exactly a hardened surface, otherwise the withered locations are obtained spots (madyazhi).